ToneBoosters – All Plugin Bundle 1.2.5 (VST, VST3, AAX, AU) [WIN.OSX x86 x64]

_

A set of plugins consisting of:
Barricade 4.2.6 – hard limiter (brickwall) limiter
BusCompressor 3.2.1 is a high-quality, transparent dynamic processor with a custom knee and auto-release, suitable for processing individual tracks, as well as complex mixes.
Compressor 3.2.1 is a versatile compressor that fits almost any audio content. Its advanced signal analysis algorithms make it very transparent to change the dynamic range. Conversely, when manually adjusting the parameters, it can provide a “music pumping effect”
DeEsser 3.2.1 – removes or reduces the excess of vocal sibilants (for example, “ccc” and “shshsh”), without adversely affecting the low-frequency (voiced) parts of the signals. There is no need to adjust the attack or release parameters, since these properties are automatically adjusted depending on the input signal. In stereo mode with a separate TB band, DeEsser also provides the ability to limit any excess high-frequency content in other signals, including full stereo mixes.

Dither 3.2.1 – plugin designed to convert the bit depth of the sound with the least possible loss of quality.
EBUCompact 3.2.1 – plug-in for measuring the volume of the stereo signal.
EBULoudness 3.2.1 plugin for measuring and normalizing sound using the volume level instead of the standard Peak Meter.
Equalizer 4.1.3 – a new dynamic equalizer with an embedded algorithm of artificial intelligence to help in mixing music. The auxiliary AI function will listen and make recommendations for equalizing frequencies, depending on the type of audio content.
Evoke 3.2.1 – Virtual Dynamic Processor and Enhancer. It consists of a filter, a transparent compressor, an intelligent limiter, a multiband processor of redundant sibilants and an exciter.
Ferox 3.2.1 – With all the advantages of digital audio processing and recording (low noise, high dynamic range, almost flat frequency response, low distortion), it is sometimes difficult to get that same subtle vintage warmth. This is where TB Ferox appears. It simulates a smooth compression and saturation, which reminds one of those good old days of recording on magnetic tape.
FlX 3.2.1 – combines an equalizer and a dynamic processor. It works just like most equalizers; It has 6 filter sections with a large number of controls to change their effect on the spectrum.
Gate 3.2.1 is what the name suggests: a very functional and easy to use gate.
Isone 3.2.1 – emulator binaural monitor system (headphones).
MidSideTransformer is a plugin that changes the left-right channel in the mid-side and back.
Module 3.2.1 – chorus, echo, phaser, tremolo, auto-panner, tape delay, … A wide variety of modulation effects in one plugin.
Morphit 1.3.3 – Have you ever wondered how the various sound attributes of your headphones influence the mix results? Are you interested to know how your mix sounds in different headphones? Virtually all existing headphones make unwanted changes to the sound. TB Morphit will help reduce these unwanted artifacts by improving the response of supported headphones. Moreover, it can mimic the sound of any other supported headphones.
ReelBus 4.0.6 is a true analog tape recorder that is designed to accurately simulate all properties associated with a tape, including frequency and level saturation, intermodulation effects, offset, tape jamming, noise, wow and flutter and electronic circuitry clipping.
Reverb 4.1.3 – algorithmic reverb. Simulate any acoustic environment from a small room to a warm and dense concert hall
Sibalance 3.2.1 is a plugin (de-esser) for sibilant processing, using selective filter processing for an ultra-transparent result.
TimeMachine 3.2.1 – emulator of vintage samplers.
VoicePitcher 3.2.1 is a simple but effective plugin for changing the pitch and tone of a vocal or voice.

New in version


– Windows plugins
32 bit plugins included in installer (AAX plugins which require a 64-bit host)
– Enhancer v1.0.0
First release of our intelligent, triple-band enhancer plugin
– Equalizer v4.1.4
Added crosshair functionality when hovering equalizer editor
Added visual indication for sections
Added indication of both sections
Added 4th, 6th and 8th order analog flat flat-top filters
Added 4th, 6th and 8th order analog low-shelving filters with resonance
Added 4th, 6th and 8th order analog high-shelving filters with resonance
Various enhancements and stability improvements
– Morphit v1.3.3
New headphone profiles: Sony WH1000XM3, Meze 99 classic, NAD Viso HP50, Koss Pro 4aa, Senheiser HD800s, Sony MDR XV950B1, Sony MDR XV950N1, AKG N60NC, Dolby Dimension
– Barricade v4.2.6
Various enhancements and stability improvements
– ReelBus v4.0.6
Various enhancements and stability improvements
– Reverb v4.1.3
Various enhancements and stability improvements
Installation:
macOS :
An example on the VST format. Copy .vst files from all distribution folders, place them in your folder with VST plug-ins at / Library / Audio / Plug-Ins / VST, launch keygen, generate license files and place them in the same folder with VST plug-ins so that they all lay with the .vst files. Algorithm for other formats is the same.
on WIN is the same.





Dither 3.2.1 – plugin designed to convert the bit depth of the sound with the least possible loss of quality.
EBUCompact 3.2.1 – plug-in for measuring the volume of the stereo signal.
EBULoudness 3.2.1 plugin for measuring and normalizing sound using the volume level instead of the standard Peak Meter.
Equalizer 4.1.3 – a new dynamic equalizer with an embedded algorithm of artificial intelligence to help in mixing music. The auxiliary AI function will listen and make recommendations for equalizing frequencies, depending on the type of audio content.
Evoke 3.2.1 – Virtual Dynamic Processor and Enhancer. It consists of a filter, a transparent compressor, an intelligent limiter, a multiband processor of redundant sibilants and an exciter.
Ferox 3.2.1 – With all the advantages of digital audio processing and recording (low noise, high dynamic range, almost flat frequency response, low distortion), it is sometimes difficult to get that same subtle vintage warmth. This is where TB Ferox appears. It simulates a smooth compression and saturation, which reminds one of those good old days of recording on magnetic tape.
FlX 3.2.1 – combines an equalizer and a dynamic processor. It works just like most equalizers; It has 6 filter sections with a large number of controls to change their effect on the spectrum.
Gate 3.2.1 is what the name suggests: a very functional and easy to use gate.
Isone 3.2.1 – emulator binaural monitor system (headphones).
MidSideTransformer is a plugin that changes the left-right channel in the mid-side and back.
Module 3.2.1 – chorus, echo, phaser, tremolo, auto-panner, tape delay, … A wide variety of modulation effects in one plugin.
Morphit 1.3.3 – Have you ever wondered how the various sound attributes of your headphones influence the mix results? Are you interested to know how your mix sounds in different headphones? Virtually all existing headphones make unwanted changes to the sound. TB Morphit will help reduce these unwanted artifacts by improving the response of supported headphones. Moreover, it can mimic the sound of any other supported headphones.
ReelBus 4.0.6 is a true analog tape recorder that is designed to accurately simulate all properties associated with a tape, including frequency and level saturation, intermodulation effects, offset, tape jamming, noise, wow and flutter and electronic circuitry clipping.
Reverb 4.1.3 – algorithmic reverb. Simulate any acoustic environment from a small room to a warm and dense concert hall
Sibalance 3.2.1 is a plugin (de-esser) for sibilant processing, using selective filter processing for an ultra-transparent result.
TimeMachine 3.2.1 – emulator of vintage samplers.
VoicePitcher 3.2.1 is a simple but effective plugin for changing the pitch and tone of a vocal or voice.

New in version


– Windows plugins
32 bit plugins included in installer (AAX plugins which require a 64-bit host)
– Enhancer v1.0.0
First release of our intelligent, triple-band enhancer plugin
– Equalizer v4.1.4
Added crosshair functionality when hovering equalizer editor
Added visual indication for sections
Added indication of both sections
Added 4th, 6th and 8th order analog flat flat-top filters
Added 4th, 6th and 8th order analog low-shelving filters with resonance
Added 4th, 6th and 8th order analog high-shelving filters with resonance
Various enhancements and stability improvements
– Morphit v1.3.3
New headphone profiles: Sony WH1000XM3, Meze 99 classic, NAD Viso HP50, Koss Pro 4aa, Senheiser HD800s, Sony MDR XV950B1, Sony MDR XV950N1, AKG N60NC, Dolby Dimension
– Barricade v4.2.6
Various enhancements and stability improvements
– ReelBus v4.0.6
Various enhancements and stability improvements
– Reverb v4.1.3
Various enhancements and stability improvements
Installation:
macOS :
An example on the VST format. Copy .vst files from all distribution folders, place them in your folder with VST plug-ins at / Library / Audio / Plug-Ins / VST, launch keygen, generate license files and place them in the same folder with VST plug-ins so that they all lay with the .vst files. Algorithm for other formats is the same.
on WIN is the same.

Year / Release Date : 04.2019
Version : 1.2.5
Developer : ToneBoosters
Developer site : ToneBoosters
Format : VST, VST3, AAX, AU
Digit capacity : 32 \ 64bit
Tabletka : present (for mac WIN emulator is required)
System requirements : Intel CPU, OS X 10.10 or higher \ SSE2 CPU, Windows 7 SP1 or higher





#